Common Metal Clamp Types for Automotive Industry
Metal clamps are often seen and used in production, and the types of applications and industries are also very wide, so what are the main applications of metal clamps in the automotive industry? Let’s take a look at it Metal clamps in the automotive industry are mainly involved in the following three places: 1, the […]
The advantages of industrial remote controls
Industrial wireless remote control originated in Europe and is currently an advanced and promising operating device for lifting equipment. After decades of technological development and improvement, it has become a very mature and reliable product, widely used in developed countries and regions. Currently, more and more enterprises are adopting and using industrial wireless remote control […]
What is Expansion Joint？
Expansion joint is a flexible structure installed on the container shell or pipeline to compensate for additional stress caused by temperature difference and mechanical vibration. Due to its advantages such as reliable operation, good performance, and compact structure, it has been widely used in sectors such as chemical, metallurgical, and nuclear energy as an elastic […]
What Is A Valve
The valve is a pipeline accessory used to open and close the pipeline, control the flow direction, and adjust and control the parameters (temperature, pressure and flow) of the conveying medium. According to its function, it can be divided into shut-off valve, check valve, regulating valve, etc. The valve is a control component in the […]
Installation Standard Supports And Hangers
1) It has an effect on the stress distribution state, maximum stress value, end force and moment of the pipeline system, because the load at the end of the pipeline system will be transmitted to the equipment connected to the end of the pipeline. Therefore, the reasonable setting of the support and hanger can improve […]
Surface finish polishing
Stainless steel during hot working, machining or place after a certain period of time the surface will form a layer of black or gray scale, the main ingredients for Cr2O3, NiO and very refractory FeO, Cr2O3, affect the appearance quality, their presence on the one hand, on the other hand also influence on the performance […]
Introduction to Pipeline Supports / Hangers Systems
Pipes can be defined as pipes made of metal, plastic, wood, concrete, or fiberglass. Pipelines are used to transport liquids, gases, slurries, or small particles. Pipeline systems are typically considered to include complete interconnections of pipelines, including online components such as fittings and flanges. Pumps, heat exchangers, valves, and storage tanks are also considered as […]
How to choose Spring Hangers or Spring Supports
Spring supports are installed when the vertical movement of the pipe is such that solid support is not suitable, either because the pipe lifts off the support or the downward movement is restrained, thus setting up large stresses in the line and/or high loadings on equipment nozzles. Types of spring supports:Variable Spring supportsConstant Spring supports […]
Constant Spring Hangers
TopFasterners.com provide constant spring hanger, usually referred to as a constant, provides constant support force for pipes and equipment subjected to vertical movement due to thermal expansion at locations where maintaining a constant stress is critical. This constant resistance is achieved by having two-moment arms pivoted about a common point. The load is suspended from […]
Variable Spring Hangers
TopFasterners.com provide seven types of variable spring hangers, designated by the letters A-G. These are shown in Figure 1, below. The primary difference between the types is in the manner in which they are supported, and thus the details of installation will be different for each type. More information on the individual types may be […]
